Wilkins 1" 375 Reduced Pressure (RP) assembly for non potable use.  This does not meet lead free requirements.

MAJOR REPAIR KIT 3/4"-1".  THIS KIT HAS ALL INTERNAL PARTS EXCEPT THE TWO CHECK SPRINGS.

RP40 RV MAJOR REPAIR KIT 3/4"-1".  ALL INTERNAL COMPONENTS, RUBBERS, PLASTIC AND SPRING FOR THE RELIEF VALVE.

RUBBER KIT FOR BOTH CHECK VALVES AND THE RELIEF VALVE FOR A 3/4"-1" RP40 SERIES.

THIS IS FOR THE ORIGINAL CONBRACO PVB, 40 SERIES. RUBBERS FOR ALL COMPONENTS IN THE ASSEMBLY 1/2"-1"

Replacement check for the 1" Conbraco 4V series PVB assembly.  Completely assembled.

765 1 " AND 1 1/4" CHECK ASSEMBLY.  THIS IS JUST THE PLASTIC HOLDER, RUBBER, SCREW AND THE GUIDE LEGS.  COMES DISASSEMBLED.

RUBBER KIT FOR BOTH CHECKS AND RELIEF VALVE FOR MODELS  825Y, LF825Y, 825YA AND LF825YA FOR SIZES 3/4", 1", AND 1 1/4" .

FEBCO 825Y OR 825YA 3/4", 1" AND 1 1/4" SIZE ASSEMBLY  THIS IS ONE CHECK SEAT FOR EITHER CHECK.  THIS IS NOT FOR THE LF825Y OR LF825YA MODELS.  

850/860/880 also fits lead free versions, LF850 and LF860 1" single poppet assembly for either check.

850/LF850 1" check rubber kit for both checks. Can also be used for the 860/LF860 1" checks.

 #1 CK MODULE FOR MODELS 860/880 AND LF860 1"

RV MODULE 860/880 1/2"-1".  THIS IS NOT TO BE USED WHERE LEAD FREE IS REQUIRED!

NOTE!  THE PICTURE IS OF ONE FOR THE 1 1/4" - 2" SIZE.  THE INTERNAL PART STICKING UP IS SIMILAR TO THE 1"  AND SMALLER KIT, BUT THE COVER FOR THE 1" AND SMALLER ONLY HAS 2 BOLTS.  YOU WILL GET THE RIGHT KIT IF YOU ORDER THIS PART NUMBER.

Air gap fitting for models 860 and LF860 and 880 models in 1/2", 3/4" or 1" sizes

CHECK RUBBER FOR EITHER CHECK.  IT IS ONLY ONE CHECK RUBBER PER KIT.  FOR MODELS DC4A OR DCLF4A, RP4A OR RPLF4A.  FOR 1" SIZE ASSEMBLIES.

PART# 4A00502  RP4A/LFRP4A  #2 CK OR EITHER CHECK FOR THE DC4A/DCLF4A 1" MODEL.

IT IS ALSO THE PVB4A CHECK FOR THE 1 1/4" AND 1 1/2" SIZES

CAUTION!  This part IS NOT THE CHECK FOR THE PVB4A 1"  It does not fit the PVB4A 1"!  If you have a PVB4A 1" and you need the check assembly you need a part number 4A00402!

 COMPLETE 1ST CHECK VALVE FOR RP4A OR RPLF4A 1"

Rubber for relief valve only for models RP4A AND RPLF4A 1/2", 3/4" and 1" sizes.

 PVB4A RUBBER KIT FOR 1" ASSEMBLY

1" PVB4A FLOAT & BONNET COMPLETE TOP HALF KIT 

DC4A AND DCLF4A COMPLETE INTERNAL KIT FOR 1" MODELS.  THIS IS BOTH COMPLETE CHECK ASSEMBLIES.

1" RP4A and RPLF4A Complete Internals For Both Checks and Relief Assembly. This Complete Kit has all you need but if you have any question please reach out. PART# 4A00510  

RUBBERS FOR BOTH CHECKS AND THE RELIEF VALVE FOR THE RP4A/RPLF4A 1" MODEL.  THIS KIT REPLACES THE 4A00509.  THE ONLY DIFFERENCE IS INSTEAD OF ALL THE RUBBERS IN JUST ONE BAG THEY HAVE THREE DIFFERENT PACKAGES (TWO CHECK RUBBER KITS AND ONE RELIEF VALVE RUBBER KIT) IN ONE BAG.

APOLLO RP4A 1" REDUCED PRESSURE (RP) ASSEMBLY (NOT FOR POTABLE USE). NOT LEAD FREE!   COMPLETE BACKFLOW ASSEMBLY INCLUDING SHUT OFF VALVES.