THIS IS BOTH COMPLETE CHECKS MINUS THE SPRINGS FOR THE RP40 OR DC40 SERIES 1 1/4" - 2"

RUBBERS FOR BOTH CHECKS FOR THE 40 SERIES EITHER THE DC/RP 1 1/4"-2".  IT CONTAINS TWO CHECK DISCS, TWO COVER O-RINGS AND TWO SEAT O-RINGS.

REPLACEABLE CHECK SEAT KIT FOR APOLLO DC40 OR RP40  1 1/4"-2"  MODEL

40 SERIES, EITHER THE DOUBLE CHECK OR REDUCED PRESSURE VERSION, 2 1/2"-3" RUBBER REPAIR KIT.  KIT INCLUDES RUBBERS FOR BOTH CHECKS.

1 1/2"  male x female ball valve for the later version of the series Conbraco/Apollo Model assemblies.  This is an Apollo ball valve

Check and relief valve seat tool.  Three different tools to repair sizes 1/2"-2".  These are for the 40 series double check and reduced pressure assemblies.

This ball valve is the #2 (outlet ball valve) for the 40 series 1".  It is male x female.  Originally this was  a female x female ball valve.  Verify which you need before ordering this

Inlet ball valve for Apollo/Conbraco 40 Series assemblies.  This is tapped for a test cock.  Originally this assembly used a female x female ball valve so verify which you need before ordering.

This is the outlet ball valve for the Apollo/Conbraco 40 series models.  Originally this ball valve was female x female so verify which you need before ordering this valve.

Spring for either #1 or #2 check on the DC40 1 1/4", 1 1/2" and 2" sizes.  For RP40 it is the #2 spring only, same sizes.

This is the complete check assembly.  It is the same check for the 40 series, double check, but it is only for the #2 check on the 40 series reduce pressure assembly.  This fits both the 2 1/2" and 3" assemblies.  Also comes with the cover o-ring.