1/2" MIP plastic plug for test cocks.  Sold only in packs of 25.

These fittings are for test cocks that are on assemblies that are 2 1/2", 3", and 4" line sizes.

QUICK CONNECT TEST COCK ADAPTER KIT

Designed for hand tight connection of Differential Pressure Test Gauges to Backflow Prevention Assemblies.

No Wrenches or Teflon Tape Required Set includes all fittings required to test any size Backflow device.

• (3) 1/4″ NPT X 1/4″ Flare
• (3) 1/2″ NPT X 1/4″ FNPT
• (3) 3/4″ NPT X 1/4″ FNPT

Includes 3 spare O-rings per size packaged in a convenient zip-lok plastic storage bag.

THIS IS ALL INTERNAL REMOVABLE PARTS BUT BOTH CHECK SPRINGS FOR A 1/4"-1/2".

Stainless steel relief valve complete kit for the RP40SS 1/4" - 1/2" .  This is all the internal parts except the check springs.

PART# 40003A4 COMPLETE RUBBER KIT FOR BOTH CHECKS AND THE RELIEF VALVE FOR A  1/4"-1/2" SIZE

PART# 40003A7  RP SEAT KIT 1/4"-1/2".  THIS IS SEATS FOR BOTH CHECKS AND THE RELIEF VALVE.

PART# 4050001   PVB RUBBER KIT 1/2"-1"

1/2" DCV MAJOR REPAIR KIT BOTH COMPLETE CHECK ASSEMBLIES.

PART#4V50001 1/2"-3/4" CK VALVE REPAIR KIT

BONNET ASSEMBLY FOR THE 1/2" AND 3/4" 765.  KIT INCLUDES BONNET AND BONNET ORING.

Febco 765 check assembly for 1/2" - 3/4".  Includes the brass holder, the rubber disc, the screw and guide.

PART# 905339† OPPET ASSY 850/860 1/2"-3/4"

PART# 905342† RUBBER KIT 850 1/2"-3/4"

#1 CK MODULE 860/880 AND FOR LF860 SIZES 1/2"-3/4"

RV MODULE 860/880 1/2"-1".  THIS IS NOT TO BE USED WHERE LEAD FREE IS REQUIRED!

NOTE!  THE PICTURE IS OF ONE FOR THE 1 1/4" - 2" SIZE.  THE INTERNAL PART STICKING UP IS SIMILAR TO THE 1"  AND SMALLER KIT, BUT THE COVER FOR THE 1" AND SMALLER ONLY HAS 2 BOLTS.  YOU WILL GET THE RIGHT KIT IF YOU ORDER THIS PART NUMBER.

Air gap fitting for models 860 and LF860 and 880 models in 1/2", 3/4" or 1" sizes

Check and relief valve seat tool.  Three different tools to repair sizes 1/2"-2".  These are for the 40 series double check and reduced pressure assemblies.

PART# 4A00301  This is rubber for only one check.

COMPLETE 1ST CHECK ASSEMBLY FOR THE 1/2" RP4A OR RPLF4A

1/2" RP4A AND RPLF4A COMPLETE RUBBER KIT FOR BOTH CHECKS AND RELIEF VALVE.

1/2" RP4A AND RPLF4A COMPLETE INTERNALS FOR BOTH CHECKS AND THE RELIEF VALVE.

PVB4A RUBBER  FOR THE FLOAT & CHECK .5"-.75"

CAUTION!!  THIS KIT DOES NOT FIT THE 1" APOLLO PVB4A!!!!  I HAVE HAD SEVERAL PEOPLE ORDER THIS FOR THE 1".  IT WILL NOT FIT!

PART# 4A00407 1/2" AND 3/4" TOP HALF KIT FOR THE PVB4A.  KIT CONTAINS CANOPY, BONNET, FLOAT, AND SEAT.