Name: MID-WEST 110706 90° SWIVEL QUICK CONNECT SET OF 9
Brand: MIDWEST
Price: 190.0 USD
Availability: InStock
Rating: 5 (2 reviews)

MIDWEST

MID-WEST 110706 90° SWIVEL QUICK CONNECT SET OF 9

2 $ 190.00

3 in stock

90° SWIVEL QUICK CONNECT ADAPTER KIT, SET OF 9 ANGLE THREE OF 1/4", THREE OF 1/2", AND THREE OF 3/4" AND A REPLACEMENT O-RING SET.

MIDWEST

110617 Mid-West Quick Test Fittings (Set of 9) For Backflow Testing

5 $ 150.00

6 in stock

QUICK CONNECT TEST COCK ADAPTER KIT

Designed for hand tight connection of Differential Pressure Test Gauges to Backflow Prevention Assemblies.

No Wrenches or Teflon Tape Required Set includes all fittings required to test any size Backflow device.

(3) 1/4″ NPT X 1/4″ Flare
(3) 1/2″ NPT X 1/4″ FNPT
(3) 3/4″ NPT X 1/4″ FNPT

Includes 3 spare O-rings per size packaged in a convenient zip-lok plastic storage bag.

MIDWEST

MID-WEST 110704 3/4" QUICK CONNECT FITTINGS

$ 67.00

4 in stock

MID-WEST INSTRUMENT 3/4" QUICK CONNECT FITTING (SET OF 3) WITH SET OF EXTRA O-RINGS

MIDWEST

MID-WEST INSTRUMENT 110703 1/2" QUICK CONNECT FITTINGS

2 $ 58.00

6 in stock

MID-WEST INSTRUMENT 1/2" QUICK CONNECT FITTINGS (SET OF 3) WITH O-RING REPLACEMENTS

MIDWEST

Mid-West 1/4" 110631 Quick Connect Fitting

13 $ 43.00

17 in stock

MID-WEST INSTRUMENTS 1/4" QUICK CONNECT FITTING (SET OF 3). THIS SET IS FOR THE 2" AND SMALLER BACKFLOW ASSEMBLIES.

Mid-West

Mid-West Bleed Valve Assembly 830-0001

6 $ 70.00

13 in stock

Mid-West Bleed Valve Assembly. For use with Backflow testing equipment to compensate for leaking #1 ball valve during testing.

Coast 2 Coast Backflow Inc.

WV101 LARGE VALVE HANDLE WRENCH

1 $ 32.00

15 in stock

Ball Valve Wrench Large, Does Most 1 1/4", 1 1/2", And 2" Ball Valves. Also Will Work On The Larger Ball Valve Handles for Watts 3/4" - 1" PART# WV101

Coast 2 Coast Backflow Inc.

WV100 SMALL BV HANDLE WRENCH - WV100

3 $ 26.00

21 in stock

PART# WV100 SMALL BV HANDLE WRENCH WORKS ON 3/4" AND 1" SIZES MAINLY BUT MAY FIT SMALLER BALL VALVES AND SOME 1 1/4" AS WELL. THIS WILL NOT FIT THE NEWER WIDER WATTS BALL VALVE HANDLES.

WILKINS

WILKINS RK-975TOOL SEAT REMOVAL SET 950/975XL

3 $ 94.00 $ 65.80

6 in stock

SET OF TOOLS TO REMOVE THE SEATS AND TO TIGHTEN THEM BACK IN TO THE ASSEMBLY FOR MODELS 950XL/950XLT/950XLT2/975XL AND 975XL2

Apollo

Apollo 40000SRT Seat Removal Tool Kit 1/2" -2"

1 $ 59.60 $ 41.72

6 in stock

Check and relief valve seat tool. Three different tools to repair sizes 1/2"-2". These are for the 40 series double check and reduced pressure assemblies.

WA105 2000SS/3000SS/4000SS/5000SS CHK REMOVAL TOOL 2 1/2" - 4"

Coast 2 Coast Backflow Inc.

WA105 2000SS/3000SS/4000SS/5000SS CHK REMOVAL TOOL 2 1/2" - 4"

2 $ 94.99

8 in stock

Newly redesigned check removal tool. The #1 tool is made out of 3/8" steel for Ames 2000SS,3000SS,4000SS &5000SS model backflows. This tool is very secure in the slots of the check to remove it and put it back in. There are 2 extensions on each side that fit into the slots on the check and the shoulder helps hold the tool secure.
The tool for the second check is the same as before. Both tools are powder coated and work with a 1/2" ratchet.

MYSRT WILKINS WILKINS ONLY SEAT REMOVAL TOOLS

Young Plumbing LLC

MYSRT WILKINS 950XL/975XL SEAT TOOLS

10 $ 95.00

1 in stock

THESE ARE FOR THE WILKINS 950XL, 905XLT, 950XLT2 AND 975XL AND 975XL2 1/2" - 2" ASSEMBLIES.

UNDERSTAND THAT THESE ARE NOT DESIGNED TO HOLD THE SEAT ON THE TOOL AS YOU TRY AND INSTALL IT BACK INTO THE ASSEMBLY. THE PURPOSE OF THESE TOOLS IS TO LOOSEN AND TIGHTEN THE SEATS.

THEY DO BETTER THAN THE TOOLS FROM THE MANUFACTURER. THEIRS IS A FLAT PIECE OF METAL THAT CONTACTS TWO OF TEH FOUR STUBS THAT POINT INTO THE CENTER OF THE SEAT. THESE MAKE CONTACT ON ALL FOUR, USES A RATCHET TO PUT THEM IN AND OUT AND WILL ASSIST IN GETTING THE SEAT STARTED FLAT SO NOT AS LIKELY TO CROSS THREAD THEM.

WA106 AMES 2000SS/3000SS/4000SS 6" & 8" SE Models CHECK REMOVAL TOOL

Coast 2 Coast Backflow Inc.

WA106 AMES 2000SS/3000SS/4000SS 6" & 8" SE Models CHECK REMOVAL TOOL

1 $ 117.00

3 in stock

Newly redesigned check removal tool. The #1 check tool is made out of 3/8" steel for (6") Ames 2000SS,3000SS,4000SS & 5000SS and only the 2000SE 8" (as it uses the 6" checks) Model backflows. This tool is very secure in the slots of the check to remove it and put it back in. There is a large extension on each side that fit into the slots on the check and the shoulder helps hold the tool secure.
The tool for the second check is the same as before. Both tools are powder coated and work with a 1/2" ratchet.

Coast 2 Coast Backflow Inc.

WS201 SET OF 6 WILKINS SEAT TOOLS

$ 170.00

1 in stock

PART# WS201 WILKINS SEAT TOOLS (SET OF 6) FITS 1/2" - 2" CHECK AND RELIEF VALVE SEATS.

Coast 2 Coast Backflow Inc.

WS202 SET OF 6 CONBRACO SEAT WRENCHES

1 $ 170.00

2 in stock

CONBRACO/APOLLO RP40/DC40 SERIES CHECK AND RELIEF VALVE SEAT WRENCHES (SET OF 6) FITTING 1/4" - 2" SIZES

Coast 2 Coast Backflow Inc.

QT125A 1/4" ANODIZED ALUMINUM QUICK TEST FITTINGS SET OF 3

1 $ 44.99

3 in stock

Set of 3 anodized aluminum quick connect test fittings 1/4"

FEMALE PLASTIC CAP 1/4" FLAIR SOLD IN PACK OF 25

Backflow Supply

FEMALE PLASTIC CAP 1/4" FLAIR SOLD IN PACK OF 25

$ 8.75

1/4" SAE plastic cap to fit the 1/4" flair fitting.

1/4" NPT PLASTIC PLUG SOLD AS PACK OF 25

Backflow Supply

1/4" NPT PLASTIC PLUG SOLD AS PACK OF 25

2 $ 11.25

1/4" plastic male thread to put into test cocks. Sold in packs of 25.

These are for the test cocks for assemblies that have a line size feeding them of 2" and smaller.

Backflow Supply

1/4" SAE BRASS CAP WITH O-RING (SOLD IN QTY 25)

$ 12.25

9 in stock

This is a brass cap with o-ring to fit on the 1/4" SAE fittings in the test cocks, either built on or an adapter tefloned in. Sold in quantities of 25.