845-5 Backflow Test kit.

The 845-5 is in the list of Acceptable gauges from Both FCCC & HR-USC and CA-NV AWWA.  This does come with a carrying case!  Comes also with a calibration certificate from the factory!

Functions and Applications:
Model 845-5 (5) valve kit provides the capability for testing all brands of reduced pressure principle, pressure vacuum breaker and double check valve backflow prevention assemblies.

∆P RANGE: 0-15 PSID / 0-100 KPA

Product Features/Benefits

• Over 30 Years of Input from Backflow Technicians
• (5) Valve Test Kit
• Specially Designed for Testing Backflow Prevention Assemblies
• Soft-Seated Brass Needle Valves (with replaceable valve seats)
• Test kit is protected with 90 micron filters to minimize plugging with scale, sand, etc. Filter elements can be cleaned or replaced
• Portable / Removable from Case
• Durable Molded Plastic Carrying Case
• Improved Case with Storage Compartments for Fittings & Tools
• Test Procedures are Laminated in Clear Plastic
• 5 Year Warranty

Comes with gauge, hoses with filters (Red, Blue, and Yellow), carrying case, set of MIP adapters (3 of 1/4" adapters, 3 of 1/2" bushings, 3/4" bushings),strap to hang around your neck or over a pipe.

It comes calibrated from the factory, usually no more than 2-4 weeks old but there may be some exceptions.

Model 845-5 (5) valve kit provides the capability for testing all brands of reduced pressure principle, pressure vacuum breaker and double check valve backflow prevention assemblies.

Comes with gauge, hoses with filters (Red, Blue, and Yellow), carrying case, set of MIP adapters (3 of 1/4" adapters, 3 of 1/2" bushings, 3/4" bushings),strap to hang around your neck or over a pipe.

It comes calibrated from the factory, usually no more than 2-4 weeks old but there may be some exceptions.

MODEL# 835 MID-WEST TEST KIT

Ordered in from factory as requested.  Don't get many requests for these and don't want warranty and calibration running down on the shelf.  The 845-5 gauge is the exact same gauge as the 835.  Only difference is two brackets put on the gauge so it can be mounted into the carrying case.

845-5 is the more common gauge and less expensive. 

This gauge comes calibrated from the factory!

Specifications

• Gauge Type Diaphragm Differential Pressure
• Dial Size & Range (4-1/2") 0-15 PSID / 0-100 KPA
• Differential Pressure Accuracy ± .2 P.S.I.D. (Descending)
• Working Pressure: 200 PSIG
• Body Material: Glass Reinforced Engineering Thermoplastic.
• Wetted Internals: EP Elastomers, Brass and 316 S.S. Metal Parts
• Line Pressure Gauge: 1-1/2" 0-200 PSIG
• Hoses & End Fittings: Buna-N jacket and liner. Schrader 1/4" brass coupler -
• Hose Length: Three (3) each / 5' long (color-coded)
• Bleed Tube, One each / 4' long clear bleed tube
• Adaptor Fittings: (3) sets of brass fittings provided for hookup to all standard size test cocks
• Gauge Weight: 3.6lbs / 1.6kg
• Weight, Gauge & Case combined: 11.6lbs / 5.2kg
• Case: Polyethylene
• Size: 16"H x 14"W x 8-3/4"D
• Temperature Limitations: Maximum 150°F/65°C

       FREEZING TEMPERATURES MUST BE AVOIDED

It is capable of performing all known test procedures including those recommended by ASSE, AWWA, CSA, FCCC and HR-USC and NEWWA.

Model 835 (5) valve kit provides the capability for testing all brands of reduced pressure principle, pressure vacuum breaker and double check valve backflow prevention assemblies.